In Japan tools are allowed in carry-on with conditions, and in checked bags.
Checked against the official page on · Report a correction
Carry-on: Small tools only. Screwdrivers: total length 15cm or less and shaft 6cm or less. Spanners, wrenches and crowbars: 15cm or less. A small portable tool set is fine if it has no ice pick or awl. Electric screwdrivers, drills and saws cannot be carried on. Checked baggage: Yes.
Tools on flights in and from Japan
The rule for tools comes from the Civil Aviation Bureau's list of restricted items and is the same on domestic and international flights.
| Where | Allowed? | What applies |
|---|---|---|
| In the cabin | Yes, within limits | Small tools only. Screwdrivers: total length 15cm or less and shaft 6cm or less. Spanners, wrenches and crowbars: 15cm or less. A small portable tool set is fine if it has no ice pick or awl. Electric screwdrivers, drills and saws cannot be carried on. |
| In checked baggage | Yes | Yes. |
Screwdrivers, spanners and pliers: what each list measures
Japan, the TSA, the European Commission, South Korea and Hong Kong all measure tools, but not along the same part. Some other lists skip the ruler and name the tools.
- Whole tool, shaft only, or metal part
- Japan measures a screwdriver overall and along the shaft, and both must fit: 15 cm or less in total, 6 cm or less of shaft. The TSA measures screwdrivers, wrenches and pliers from end to end and allows 7 inches or shorter. The European Commission and Hong Kong's CAD look at the blade or shaft alone and ban more than 6 cm, and South Korea measures the metal part without the handle.
- Screwdrivers that come apart
- Japan's list adds a measuring rule for screwdrivers whose grip and shaft can be separated: measure with the parts fitted together. The TSA writes the same idea into its entries for screwdrivers, wrenches and pliers: measured from end to end when assembled. Taking a screwdriver apart does not shorten it for either list.
- Spanners and pliers: measured in some places, refused by name in others
- Japan allows spanners, wrenches and crowbars of 15 cm or less in the cabin, and the TSA applies its 7 inch line to wrenches and pliers. GOV.UK gives these tools no length: its work tools table says no to a screwdriver, pliers, a wrench or spanner and a crowbar. Hong Kong's CAD bans pliers and wrenches or spanners outright. Pliers have no row on Japan's list.
- Power tools, drills and drill bits
- Japan's list refuses electric screwdrivers, electric saws and drills in the cabin, and counts mains, battery and rechargeable drills alike. Drill bits have their own row: not allowed in the cabin because they could be used in combination with other things. The TSA says power tools must be packed in checked bags, while spare lithium batteries for them travel in a carry-on bag.
- Calipers, rulers and compasses
- Japan's list marks drawing compasses and dividers as allowed in both bags, and calipers on the row above them the same way. Taiwan's CAA reads measuring tools differently: metal vernier calipers and metal rulers thicker than 0.5 mm are on its list of items that must be checked. CAAC lists vernier calipers among the tools that cannot be carried on.
Tools: the rule country by country
Tools are not allowed in carry-on in the United Kingdom, Taiwan, Mainland China and Australia.
| Flying from | Carry-on | Checked bag | What the authority says |
|---|---|---|---|
| JapanCivil Aviation Bureau | With limits | Yes | Small tools only. Screwdrivers: total length 15cm or less and shaft 6cm or less. Spanners, wrenches and crowbars: 15cm or less. A small portable tool set is fine if it has no ice pick or awl. Source |
| United StatesTSA | With limits | Yes | Tools 7 inches or shorter (measured from end to end when assembled) are allowed in carry-on bags. Tools longer than 7 inches are prohibited in carry-on and must be packed in checked bags.TSA entry: Screwdrivers (shorter than 7 inches), Wrenches/Pliers Source |
| European UnionEuropean Commission, EASA | With limits | Yes | Tools with a blade or shaft of more than 6 cm usable as a weapon, such as screwdrivers and chisels, are prohibited in cabin baggage. Such items (the page names drills and saws) must be surrendered at security or packed in hold luggage. Source |
| United KingdomUK Government | No | Yes | Screwdrivers, pliers, wrenches and spanners are not allowed in hand luggage, and neither is any tool with a blade or shaft longer than 6cm. They can go in hold luggage. Source |
| South KoreaMOLIT Aviation Security 365 | With limits | Yes | Tools that could be used as a weapon, such as screwdrivers and chisels, are banned from the cabin when the metal part (handle excluded) is over 6cm. They can go in checked baggage. Source |
| TaiwanCivil Aviation Administration | No | Yes | Screwdrivers are named among the tools (with hammers, axes and awls) that may not be in hand baggage or carried on your person. They must go in checked baggage. Source |
| Hong KongCivil Aviation Department | With limits | — | Wrenches, spanners, pliers and hammers are banned from cabin baggage, as are tools with blades or shafts of more than 6 cm, such as screwdrivers and chisels. Source |
| Mainland ChinaCAAC | No | Yes | Tools such as screwdrivers, wrenches, pliers, saws, crowbars and drills with bits cannot be carried on but can be checked. Source |
| AustraliaHome Affairs, CASA | No | Yes | Screwdrivers, crowbars, hammers, pliers and wrenches, and hardware tools in general, are prohibited in carry-on. They can go in checked baggage.CASA Pack Right entry: Screwdrivers, crowbars, hammers, pliers and wrenches, Hardware tools Source |
Each row comes from that authority's own page. Airlines can be stricter, and the screening officer has the final say.
If security in Japan will not let tools through
- What to do
- Move tools to the bag you check in before you reach security. Narita Airport states that anything given up at the checkpoint is discarded and cannot be returned.
Buying tools in Japan
- Where to buy
- Home centres and hundred-yen shops.
Frequently asked questions
Can you take tools on a plane?
On flights in and from Japan: Small tools only. Screwdrivers: total length 15cm or less and shaft 6cm or less. Spanners, wrenches and crowbars: 15cm or less. A small portable tool set is fine if it has no ice pick or awl. Electric screwdrivers, drills and saws cannot be carried on. In checked baggage: Yes.
Can you take a screwdriver in carry-on baggage?
Only a short one, and not from every airport. Japan allows a screwdriver of 15 cm or less overall with a shaft of 6 cm or less, measured with the grip attached. The TSA allows screwdrivers of 7 inches or shorter. GOV.UK says no to any screwdriver in hand luggage, and Taiwan's CAA and Australia's Home Affairs list screwdrivers among the tools that cannot be carried on.
Can you bring a cordless drill on a plane?
Yes in checked baggage, no in the cabin. Japan's list marks drills as not allowed in carry-on, battery and rechargeable ones included, and treats drill bits the same way. The European Commission's list bans drills and drill bits, including cordless portable power drills, from cabin baggage. The TSA says power tools with installed batteries must be packed in checked bags, protected from accidental activation.
Does the TSA allow tools in carry-on bags?
Tools 7 inches or shorter (measured from end to end when assembled) are allowed in carry-on bags. Tools longer than 7 inches are prohibited in carry-on and must be packed in checked bags.
Can you take tools in hand luggage in the UK or Europe?
The United Kingdom: Screwdrivers, pliers, wrenches and spanners are not allowed in hand luggage, and neither is any tool with a blade or shaft longer than 6cm. They can go in hold luggage. The European Union: Tools with a blade or shaft of more than 6 cm usable as a weapon, such as screwdrivers and chisels, are prohibited in cabin baggage. Such items (the page names drills and saws) must be surrendered at security or packed in hold luggage.
What is the rule for tools on flights from Taiwan, Mainland China and Australia?
Taiwan: Screwdrivers are named among the tools (with hammers, axes and awls) that may not be in hand baggage or carried on your person. They must go in checked baggage. Mainland China: Tools such as screwdrivers, wrenches, pliers, saws, crowbars and drills with bits cannot be carried on but can be checked. Australia: Screwdrivers, crowbars, hammers, pliers and wrenches, and hardware tools in general, are prohibited in carry-on. They can go in checked baggage.
Read more
- Can You Bring Tweezers on a Plane to Japan? 2026 RulesTweezers with rounded tips can go in your carry-on in Japan. Nail clippers pass too, sc…
- Can You Take Nail Clippers on a Plane? Yes, Minus the KnifeYes: you can take nail clippers on a plane in Japan, in carry-on and checked bags, unle…
- Halloween in Japan 2026: Shinjuku Drinking Ban From 5pmHalloween in Japan is a costume night with no day off. On Saturday 31 October 2026, Shi…
- Nishiki Market vs Kuromon vs Tsukiji: Hours and Eating RulesNishiki Market asks you to eat at the shop, Kuromon welcomes eating as you stroll, and …
Sources for this page
- Japan Civil Aviation Bureau (MLIT) — Items restricted in carry-on and checked baggage (updated 24 April 2026)
- TSA — What Can I Bring?: Screwdrivers (shorter than 7 inches) + Wrenches/Pliers
- European Commission — List of prohibited articles in your cabin baggage
- GOV.UK — Hand luggage restrictions: Work tools
- Aviation Security 365 (MOLIT / KOTSA) — Items prohibited on board
- Taiwan CAA — Articles that may not be carried into the aircraft cabin (announcement of 18 June 2024)
- Civil Aviation Department (Hong Kong) — Packing Tips for Air Passengers
- CAAC — Air travel basics (航空旅行常识)
- CASA — Pack Right: Screwdrivers, crowbars, hammers, pliers and wrenches
- Australian Department of Home Affairs — TravelSECURE: What you can and can't bring
- Taiwan CAA — Items that may not be carried into the cabin (公告 113.06.18)
- GOV.UK — Hand luggage restrictions at UK airports
